Friday, December 24, 2021

How To Catch Walleye

I love to go walleye river fishing. It just depends on where
you fish. River fishing sometimes takes a bit more skill.
The rewards are definitely out there just waiting for you.
That being a big lunker of a walleye. Now the secret to catching
big river walleye.

I hear a lot of river fishermen like to fish close to dams or
by river mouths during the spring fishing season. I guess you
can catch them there alright. I don't like to fish shoulder to
shoulder or crammed into a small area.

What a lot of the pros do is head further upstream about 10 miles
from the main log jam of anglers. That's where all the walleye
that haven't made it to the spawning beds are holding.

You should realize that the walleye don't all spawn at the same
time. Finding them is as easy as finding rock structure, springs
or rubble flats. Also you will find them in a deep transition
shoreline. These will be your hot spots for big walleye.

Finding the best place on a river for fishing walleye.
Look for something that is characteristic of the walleye.
Objects like sandbars, a ledge or current break are the
habitats of the spring walleye. Try not to fish big sections
all at once. Break it up into small sections. This will allow
you to more easily find those big walleye.

While fishing the deeper rivers remember that the walleye
are fighting the current as they travel upstream. They will
rest in these holes as they go.

This is a good time to use a heavier weight and a three-way
swivel with a crank bait. Just drop these down into the deep
holes.

Like I said before this is where you will find the walleye
heading upstream to the spawning beds if you don't find them
in other spots of the river.

When using baits its always a good to remember that each river
is different and so will the baits you will be using. One river
may catch them on crank baits while another will catch them on
soft baits. Still another you may need to use a jig and small
minnow. Also colors will have to be tested.

It'll help to bring along different baits for different
fishing conditions as well as the many different fishing
locations and differences.

Walleye Fishing Tips is what your looking for? With lots of great info for catching more and bigger fish. Check out Walleye Night Fishing


GoArticles - Jun 17/09

NEW ARTICLE

The size of the minnow is going to depend on the
time of year you fish the walleye. Before spawning,
a tiny minnow is best, but after spawning when
they are replenishing their food intake, you can
start using bigger minnows.

Right before winter, a larger minnow works because
the walleye are gorging for the winter months and
are going for the bigger baits.

If you find that the weather is slightly colder
on a given day, you might want to give up the
lake fishing and head to the river. Walleye will
stay on the river side if the temperature cools
down.

The river water temperatures are slightly higher
at this time and the walleye move around more
in the river water than they do in the colder
water. If you find some weed beds, you want to
try using a tub bait, which will allow you to fish
the weeds for the walleye. Using a three-sixteenths
to a half ounce jigs work s the best for this in
the river.

Some of the big river walleye fishing areas are
great for catching walleye if you know the area.
If you fish the Ohio or Mississippi Rivers, you
can fish the lock and dam. If you fish the
Minnesota or Missouri Rivers, you want to fish
off the tip of the sand bar.

Now if you decide the Des Monies River is your
spot, you would want to fish of the logjam. Now
the Red River will have a bridge hole for you to
do some great walleye fishing. Depending on the
river depends on where you will fish.

The nice thing about walleye river fishing
compared to lake fishing is that the walleye in
the rivers have fought the currents as long as
they have been there and hide out in area that
give some relief from the currents.

You will even find a walleye hovering around a
downed tree that blocks the river current as
well as some bridge abutments. Because of the
fast current you need a heavier jig, which will
give some slow down of movement. You just have
to find a spot and try for the big walleye.

Some anglers do not feel you can catch a big
walleye in the rivers, but they are wrong. Some
very nice sized fish have come out of the river.

The reason seems to be that most anglers do not
know the habitat of the river walleye and they
tend to live year after year without being
caught.

Therefore, if you want to catch the big one,
try a river walleye and you will find that you
can catch your limit everyday if you want too.

Just remember to have along different baits
for different water conditions as well as
location differences.

Thursday, December 23, 2021

Removing man made scents on your hands while fishing - fishing



 How To Get Rid Of The Human Hand Scents While Fishing

It's not enough to have a scented lure. So many human smells and odors are negative associations to fish. And these smells are constantly coming in contact with your bait/lures and equipment. Here are some tips for to use on anglers hands to mask unnatural, negative scents to fish while providing proven attractants to their hands.

 1. You can rub bait fish on your hands before touch fishing equipment.

 2. If fishing from shore rub your hands in the sand and water in the body of water your fishing in.

3. In a boat you can use the floating grass or weeds to rub on your hands.

 Try to use things of nature that are in the area you're going to fish. Doing this should help get rid of any human scent left on your hands.

Wednesday, December 22, 2021

Do Fish Eat Newts Bass Love Salamanders!!



Do Fish Eat Newts

All newts are salamanders but not all salamanders are newts

Newts as they come out of water after they are breeding they will travel up to 1km to look for food. Some of these yummy eats are worms and beetles. They like to live in damp areas on land. Its main predators of the young newts and the eggs (and a lot of other pond life) are fish. The larger predators such as foxes, grass snakes and herons will eat the adults.

Newts are used as bait for catching fish.

Newts can be trapped and used for bait or pets.

Newts are amphibious the same as frogs which big fish devour also.

You can also buy soft plastic baits that imitate a newt in different sizes and colors.

So for more information on fishing with newts click here

                                                                        Fishing With  Newt

Tuesday, October 12, 2021

Survival Fishing- The Ultimate Primitive Basket Fish Trap





http://en.wikipedia.org/wiki/Fishing_weir

The Science of Fishing Traps

Fishing is a commercial activity done at an exporting level in some countries. In other countries, fishing seems to be a leisure activity for most people. In the U.S mainly, both adults and kids love catching these creatures. In order to catch fish for export or domestic use, fishermen have to use fishing traps. These are just snares without which the activity would be possible. There are different types of traps and their major disparity is the way they are set.

Some are huge structures attached to the shores of the water body. Others are just simple, tinier structures held by hand or set from a vessel. Often, the smaller snares' other name is pots. In order to purchase the most suitable trap, you need to know what is available. A common design available includes the type that forms a barrier or a wall. In short, immediately after the fish enters, the fisherman creates a barrier that makes it impossible for it to exit.

Hence, the logic behind them is blocking the movement of any species you want to aim at. Good examples in this case include building fences, buying fyke nets and so on. The habitat fishing traps are also very common as they provide a quick hiding ground. Other popularly bought items include box, gravity, torsion, and bent rod traps. These will automatically lock when a fish enters in them. Fishing baskets are a widespread method and they are in a way that the animal would find it challenging to escape.

They are actually pot models, made of strong wires, plastic or wood. They mainly are conical in shape, but you can also find some in drum shape. These drum-like models are made of special netting that has frames and hoops. Additionally, it is possible to find box shape basket snares made of sturdy frames. Other amazing styles for catching ocean animals that often migrate on land include pitfall traps, scoop nets, rafts, boxy traps and others.

There are even styles made from tubes, such as hollow, narrow funnels. As soon as the fish enters it cannot exit backwards. Other floating styles normally held on anchors are perfect open snares. When going for shopping, few considerations are imperative. First, think about the type of fish or marine creatures you would like to catch. This would help you know the most suitable trap to buy. Further, consider how you would prefer to perform the activity.

Would you like to do it from a vessel that has haulers and winches? In such a case, you may want to consider buying simpler pot designs. If you want to try expert methods that commercial fishermen use, you might have to spend lots of money initially. Fish tackle for advanced fishing can be expensive and it is not worthwhile for a beginner. Would you like to find more information on this topic? The Internet is your best source of information and guidelines. In addition, you can buy fishing traps from an online vendor today.

G. Smitty is a writer who loves to discuss many topics ranging from ice fishing traps [http://www.fishingtraps.net/ice-fishing-traps/] to professional basketball. Thanks for reading!

Saturday, September 25, 2021

Which fish is more difficult to catch: barracuda or sword fish?

BARRACUDA FISH CATCHING AT DEEP SEA



California Ocean Fishing - All About Barracuda


Pacific Barracuda (Sphyraena argentea), now the most common big predatory fish in Southern California, is a success story in conservation efforts. Aside from the banning of gill nets, the only efforts made to return the Barracuda to previous common numbers was the imposition of a 28" minimum size limit on these toothy game fish. This allowed almost all barracuda to breed. They get up to 4 feet long but are commonly less than 3 feet. A 4 footer will only weigh about 20 lbs since the fish is so long and thin. Most keepers are in the 6 to 10 lb class.
Barracuda occur throughout Southern California and range from the surface to deep water. Though their main haunt is the fringes of the kelp beds where they stalk unsuspecting bait fish and ambush them as they wander away from cover, they often sweep through inshore flats areas chasing schools of bait. The fertile flats areas where Sand Bass breed attract many small bait fish and of course, where there's prey, predators won't be hard to find.
Though the Atlantic (Great) Barracuda can sometimes be dangerous, the Pacific Barracuda is completely harmless in the water. They're not a threat because of their small size and habit of only striking what they can eat whole. However, some caution when handling a landed fish is in order, though. These fish are strong and have long rows of sharp teeth. Many an angler has needed some bandaging when carelessly grabbing a flopping fish on the deck. The best way to pick up a Barracuda is by grabbing just behind its head, slipping your fingers under the gill plates and holding its neck. They can be pretty slimy and hard to hold. Some fishermen use a short hand gaff made up of a barbless double trolling hook attached to a 12" piece of 1" diameter hardwood dowel. This is especially effective for those of us with "office hands."
Catching Barracuda
Successful Barracuda fishermen Barracuda are primarily a fish of the summer, but of late, they have been nearly a year-round proposition. In the early spring, they move up from their deep water haunts into the near shore areas. The fishing is spotty in February, March and April. By May, becomes consistent and carries usually at least until September or October.
Barracuda are easily caught on bone jigs or bait. They will also hit flies and top water plugs but only when they are busting the surface in mid-summer near kelp beds or when you catch a school, out in the open, chasing a bait ball. The preferred jigs are blue and white, purple and white and an old favorite of mine green and black - especially for those overcast days. You can also catch them at night when they seem to prefer shiny chrome type jigs. If there are short fish about, later in the season, single hook jigs are preferred. Often, chomping on a treble hook will do real damage to the fish's mouth. It's a shame to throw a fish back after you've mutilated it's mouth and marked it for sure death. I personally use only single hooks on all my Barracuda jigs.
Streamer flies in blue and white to simulate anchovies or in green and white to simulate sardines will be the best bet for the fly fishermen. You'll probably go through lots of flies because when these fish hit, they hit HARD and are used to killing their prey instantly with their crushing jaws. Their fight is vigorous and strong, making hard turns, shaking their heads, and in general, giving the light tackle fisherman all he can handle. An eight weight rod is the minimum and a ten is preferred with a shooting head and sinking line.
Barracuda also will take bait. Live anchovies or sardines fly lined near the kelp or sent down with a Carolina rig with a sliding sinker, is the hot ticket. Beware, though, their teeth are sharp and will saw through a mono leader with ease. Some fishermen use short wire leaders. This will result in less strikes but far fewer losses.
Preparing Barracuda
Barracuda are almost always filleted by fishermen on party boats. There's more to eat on the fish though, so I usually get them gutted and gilled on the boat then take my time at home preparing them. I often scale them and slab at home then cut the long, skinny slabs into serving sized chunks with the skin on one side - perfect for barbecuing or smoking. The kama (collar) part is also an excellent piece of meat so I save these as well. If you get the chance to get Barracuda roe from females early in the season, go for it. It's excellent!
Eating Barracuda
Barracuda are excellent table fare, too. They do have a strong fish taste like salmon or tuna so they may not be for everyone's palette, but if you like fish, you'll love barracuda. Because of their high oil content, they also are great eating smoked. Barracuda are best broiled, baked, poached, sauteed, or grilled. Deep frying is not recommended because of the oil. The roe are delicious when roasted and eaten with rice, or when simmered in soy sauce and sake (nitsuke.) The collars are best just salted and broiled.
Jeff Spira is a fishermen and writer of fishing and seamanship books. His web site California Ocean Fishing offers further insights into this fun sport and has links to online sources for his books on the subject.

Swordfishing in South Florida



Southeast Florida Swordfishing - "Purple Fever"
Once you have your tackle ready to go, let us describe a typical drift out in South Florida's Gulf Stream. We are basing this drift using 4 lines. Some of your center console fisherman may be able to fish 5 or even 6 rods, but we believe 4 rods is sufficient and will cover the fathoms needed to catch that broadbill you have dreamed of. Swordfishing off the southeast coast of Florida has really taken a turn for the better. We are experiencing a fish size of 75-100lb on average. Although we are deemed to be the breeding grounds and anglers routinely catch "Pups", we have our share of three-hundred pound plus fish move through. November through January is usually some of our best months, as the water temperature is cooler. But with all good comes some bad. The seas are usually much rougher this time of year. In the summer time, we don't see as much action, but we still get our share. This is a year-round fishery and will be around for a long time as long as we don't abuse it. We ask that you please report you fish! Please report your catches and releases. We know you are not required to report a release, but by reporting that we are routinely catching the numbers, lessens the chances of commercial fisherman entering our waters. We cannot stress enough how important it is to report our catch.
We also want to practice safety especially while night fishing. We suggest that each angler on your boat carries a glowstick and whistle in his/her pocket. This way if they were to accidentally fall over, you would have a means of finding them. Another strong point is no sleeping! Cargo ships constantly are running through the swordfish grounds and if you are sleeping and they are on autopilot, trouble could be approaching. We have had some close calls to where we actually had to pick up and move to avoid a collision course with some freighters. Bottom line, if you want to sleep stay home.
Now lets fish!
Locating The Swordfish Grounds:
As you may know swordfishing takes place at night, as they are primarily nocturnal feeders. Leaving the dock in the late evening hours and coming back to the dock after midnight is the standard, depending on the time of the sunset. Calm seas have much to do with the decision of when to go out. Swordfish can be caught when it is rough or calm, but we must think safety first. The combination of a gps and good fishfinder is essential when finding good solid structure to start your drift. Off the South Florida coast, our sword grounds are generally between longitude 79-51W and 79-49W. This is roughly 15-18 miles off our coastline. A fishfinder that goes to at least 1500 feet is very beneficial; as you will see the canyons and structures that hold the bait, hence attract swordfish. *Tip - If you want to find the fish, set your fish finder range to just 100ft and you will find bait such as Tinker Mackeral or Sardines. Where there is bait, there is Sword! Swordfish are known to roam these deep depths around ridges and valleys. With the two combined units you are already ahead of the game. Radar is also an important piece of equipment, but not absolutely necessary. Once you are satisfied with your location, you want to spend the next 5-20 minutes figuring out your drift. The drift is a very important aspect. If you have heard that the bite is strong along the 79-50W line, you want to make sure you are drifting on this line. A top-notch sea anchor can work to keep you in this zone. Deploy your sea anchor off the boats center cleat for the best drift. But maybe, the bite is fluctuating from the west 48 lines to the 51 lines. In this case you would want to drift over and over these grounds. Turn on your vhf or check out our reports to see where the most action is for the night you are going out. With the proper drift you can stay in the zone all night and have baits soaking for the majority of the night. Don't be in a rush to put the baits out. Take your time and factor the wind and current and decide, "Am I going to push in shallow or out deep". Which side of the boats are the lines going to be on? How much wait should I be using to get my baits to the desired depth? How fast will my drift be? All these factors are worth considering before you turn off the engines and decide where you are going to ride out a drift.
Tackling Broadbills:Although a live bait seems ideal when setting out to catch any gamefish, don't rule out your dead baits! Bobby Boyle of RJ Boyle Studios came out with a shirt that says, "Live Bait Sux". Bobby definitely has a point when it comes to swordfish. As a beginner in swordfishing, we suggest sticking to just one live bait and the rest dead baits such as squid. You ensure a much better hookset when using a dead-bait, and your strikes will definitely not suffer from not using live-bait! Your sole livebait can be fished just under the boat around 85 feet down. It will blend in with the other baits that have congregated around your boat.
Lets discuss rigging your rods. We use mostly 50 wides, but have a few 80's that are ready for that big wintertime swordfish. A 50w is plenty sufficient for swordfish. With the invention of hollow-core braid, guys can load their 30's with the over 700 yards and be able to fish their light tackle rods for broadbills. When spooling the reels we suggest marking the last 400 feet of your line. Mark the line using waxline half stitches. This will enable you to easily drop your baits to the desired depth without having to count every time you setup. A counter can be used to count off the desired feet. If you can leave a loop in the waxline marker on your line, this would be ideal. Later on we will teach you how to tie the balloon or jug to that loop in the waxline. It is very important to make sure the waxline does not slip! Your first knot that will be used on your mainline is the popular bimini twist (about 5 ft). The knot acts as a shock absorber and is very beneficial to the rig. Take your bimini twist right to the ball bearing snap swivel and tie an offshore knot. Have this combination on all four of your rods.
Lets discuss your rigs. We first start out by measuring 15 feet of 200lb - 400lb mono leader. On the top end we crimp a loop using a nylon thimble so that we can attach it to our ball bearing snap swivel with ease. On the other end, crimp a 8/0 - 11/0 hook. Make sure the hook is very sharp, if not sharpen it. You should be able to press it against your finger nail and make a nice dent. On the hook you want to place a bridle that is used to bridle your live bait. It is a loop that is about 6 inches in diameter made out of rigging floss. Attach that bridle to the hook and you are set. Attach your live bait rig to your rods ball bearing swivel. At the swivel top circle you want to also attach 1 electralume and a flasher at your discretion. This helps to make your bait visible to the swords.
Lets rig your other 3 rods for a dead bait. A swordfish favorite is the squid. There are a number of ways to rig a dead squid, but the best method is to have the hook exposed half way down the mantle. We find this much more effective that placing the hook down by the eyes of the squid. . Once you have all four rods ready to be deployed, get out your jugs and weights, along with copper/telephone wire. Have the gaff ready to be deployed as some days you may drop the baits right into swordfish territory. We don't know how many times we seem to drop a bait right on a swordfish. Tip* If you like to take your time in setting up, that's fine. Go ahead and put out a flatline while getting your other rods ready. This way if you have a curious sword come to the boat, you atleast have a bait in the water. We have seen them come into the light on numerous occasions. If you don't have a bait in the water, most likely they will just leave.
Setting up your first Drift
Drifting for swordfish is very very effective. Providing that you have your baits staggered, your chances of catching a South Florida Sword are very good! Now that you have 4 rods that are ready to be deployed, lets get some lines in the water. Once you find your desired area to fish, shut off all engines. Here you will analyze your drift. You can deploy a sea anchor if you think you are going to need it. Once you are satisfied with the direction and speed of your drift, get the first line out. As a general rule of thumb, get your longest lines out first, meaning jug/balloon baits. Check out our forums and communicate with fellow swordfish anglers regarding everything mentioned here. You may even find out what depth the fish were biting out the night before. But a general rule of thumb is on a New Moon, you fish the baits shallower. And on a full bright moon, you fish them deeper. Tip* Be sure to have a bait at 100 feet and 300 feet. These 2 depths are critical. Once you get a bite on one, you can adjust your other rods accordingly.
With the first rod, attach the live bait rig, along with your electralume and flasher. Then take about 12 inches of telephone wire or a #64 rubber band and attach a 32-ounce weight to the swivels top circle. Wrap the telephone wire about 6 times and pull to ensure it breaks away. Put it back on and let your bait down to desired depth. For this exercise, we will go 300 feet on the first line. Once the 300-foot marker on the line comes up, attach your jug or balloon to the loop you left in the waxline using telephone wire. You can attach the balloon or jug using telephone wire or a small rubber band. Again, test to make sure it breaks away when pressure is applied by fish. Let the float out about 50-80 yards from the boat. Don't forget to put a glowstick into your jug for visibility.
Do the same to the second rod, but this time go to 200ft and let it out on the jug/balloon about 30 yards. It is very important to test different depths by the 100's. Don't forget to attach a lightstick to the jug/balloon for visibility. Once you have the 2 lines out on the jugs, lets move to your tip rods. The tip rods are called tip rods because that is exactly what they are. You will see the tip of the rod bounce heavily when a fish is slashing the bait. These rods are being fished right at the boat at varying depths. Apply the same rigs as mentioned above and set these rods at 150 feet and 100 feet. These will be your most active rods, as they are in the direct light of the boat.
Now that you have 4 lines in the water, lets get your 4ft light out and put it on the opposite side of the boat, to avoid direct light into your eyes. Turn off all boat lights and sit back and listen to your rods. Check all lines as needed. If you don't have any action within 30 minutes to an hour, start by checking your tip rods. If the baits have been slashed than bring in your balloon/jug rods and re-bait. The 4ft green light can be a very important piece of the puzzle when swordfishing. We have had bait by the dozens including bar jacks, flying fish, and dolphin come to the light. With the bait we have seen swordfish follow right behind them. When swordfishing you want to have your best game turned on. Without the light at the boat you might as well stay home. We deem this light very effective. Think about when you see a boats navigation lights about 10 miles away. Imagine a swordfish. Their eyes are enormous and we bet can see much better than we think. This could be the difference between a fun-filled night and a very frustrating night. Check out the forums for more information on the secrets and tips.
Fish On? Now What?
Once you hear the drag being taken out or you see a fish surfacing, you want to jump on that rod fast. Each rod should have a different color light that distinguishes it from your other rods. The enables you to determine which rod the fish is on. You should of had your drag set at practically nothing, just enough to keep the bait from taking off line. Get on the rod and start cranking until you get tight on the fish. Once tight, start increasing the drag until you hit about 8-16 pounds of drag. Too much drag may cause the hook to rip from the soft mouths of these fish. The hook will automatically set and you are in for a fight of a lifetime. Have a buddy put the belt on you, so you can stand up and fight the fish properly. Do not arch forward or your back will begin to hurt very quickly. Do not rush the fish. These fish get in excess of 400lbs and have been known to keep anglers on the wind for over 8 hours! Once the fish is at the boat, it is ideal to have one guy handline the leader and another guy with the gaff. We also suggest using wind-on leaders. This will help avoid the dangers of hand-lining a big fish. A swordfish has to be at least 47 inches to keep. So before hitting it with the gaff, you want to decide if you are keeping the fish or not. We recommend not keeping a fish under 60 inches. This will help the bounce back of the swordfish industry. If you do decide to keep the fish, you want to gaff the fish right in the gill plate to avoid ruining the meat. Always wear tough leather gloves, as the bill is very sharp. *Tip - Keep your hands together when leadering the fish. This will help avoid the dangers of hand lining the fish.Tight Lines,Swordfishing Central

                                                                         Bait Casting Rod And Reel